A clean and sparkling bathroom is essential for a healthy and comfortable home. However, over time, soap scum, water spots, and mold buildup can make your bathroom look dull and dirty. Knowing the secrets of how to clean your bathroom and prevent mold growth, especially on glass shower doors, will help keep your home fresh and inviting.
Mold is not just an eyesore but also capable of causing health issues if not destroyed. This guide describes the best practices for getting rid of mold on bathroom surfaces and glass shower doors to bring their shine back.
Begin with a General Bathroom Clean-Up
After getting your cleaning supplies, begin by clearing personal items such as toiletries, towels, and bath mats. This is an opportunity to clean unspotted surfaces.
Second, disinfect bathroom surfaces such as countertops, sinks, and fixtures with a gentle disinfectant or a water-vinegar mixture. Also, disinfect corners and crevices where dirt tends to accumulate.
Toilet: Use a toilet brush and hard disinfectant cleaner to clean the toilet. Let sit for a minute or two before loosening odours and stains. Flush after to clean the residue off. Bathroom mirrors should be cleaned with water and vinegar or glass cleaner to create a streak-free shine.
How to Clean Glass Shower Doors
Glass shower doors get cloudy within no time due to the soap scum and hard water deposits. To maintain them clean and clear, one needs to learn how to clean glass shower doors.
Step 1: Make a Cleaning Solution
Mix water and white vinegar in equal proportions in a spray bottle. A few drops of dish soap may be added to remove stubborn stains.
Step 2: Spray the Solution
Spray the solution liberally on the glass shower doors, including every surface. Allow it to sit for 10–15 minutes to dissolve the grime and stains.
Step 3: Gently Scrub
Clean the glass carefully using a soft-bristle brush or microfiber towel. Clean areas where soap scum or staining occurs.
Step 4: Rinse and Dry
Warm water rinses the glass, and a dry microfiber cloth is used for drying. A squeegee removes excess water and avoids streaks. For added sparkle, buff the glass with lemon juice on a cloth. The natural acidity dissolves any remaining stains and leaves a fresh scent.
Additional Read: Security Guard Equipment List: Essential Security Equipment
How to Eliminate Mold in the Bathroom
Mold enjoys damp settings, and thus, the bathroom is a fertile breeding ground that needs to happen. Learning the appropriate way of mold removal in the bathroom ensures an environment for well-being and purity.
Step 1: Identify Mold-Affected Areas
Mould also thrives in such areas, and, therefore, grout and shower walls have green and black blotches, while ceilings have green and black discolourations near fixtures.
It also invades shower curtains and bath mats.
Step 2: Clean the Mould Cleaning Solution
Mix one part of hydrogen peroxide with two parts of water in a spray bottle. You can also blend baking soda and vinegar to form a natural mould-killing paste.
Step 3: Spray the Solution
Apply the solution directly on the mould-damaged areas. To apply the paste, apply it with a sponge or cloth. Let it remain for 10–15 minutes to kill the mould.
Step 4: Scrub and Rinse
Wash the mould off with a scrub brush. Concentrate on the grout lines and corners since the mould will remain there. Wash the surface with warm water, then wipe dry with a cloth.
Step 5: Stop Mold from Coming Back
To prevent mould from returning, ventilate the bathroom more by having an exhaust fan on or opening a window following a shower. Dry wet spots and have a dry bathroom.
Deep Clean Bathroom Tiles and Grout
Bathroom grout and tiles are known to collect soap scum, dirt, and mildew as time passes. Deep cleaning will eliminate them, return them to their original condition and prevent them from accumulating.
- Step 1: Make a Grout Cleaner: Mix water and baking soda to create a paste. Some hydrogen peroxide can be added for very tough stains.
- Step 2: Use and Rub: Spread the paste on the grout lines using a toothbrush or grout brush. Keep it for 2 minutes and scrub heavily.
- Step 3: Clean and Dry: Clean the tiles using warm water and dry them up using a microfiber cloth to avoid water stains.
Why Crest force is the Right Choice for Bathroom Cleaning
We understand that cleaning bathrooms is a tiresome and time-intensive activity. At Crest force, we offer you expert bathroom cleaning services in Gurgaon and the entire NCR region as per your needs. Our cleaning agents are specialists with training in removing hard stains, mildew and mold accumulations, and even those inaccessible locations.
We employ industry-strength cleaning materials and state-of-the-art methods to leave you with a shining and clean bathroom. From the deep cleaning of your tiles to understanding how to clean glass shower doors, we have your back. We aim to deliver a clean and fresh environment to you so you can attend to other matters of concern. We will do all the hard work so you don’t have to and can sit back and relish a sparkly clean bathroom.
Conclusion
A clean bathroom is maintained with regular cleaning and proper techniques. Follow these professional tips to learn how to clean the bathroom and deal with mold problems effectively. Regular cleaning not only makes your bathroom look clean and beautiful but also prevents long-lasting mold damage and hard water spots.
Understanding how to clean glass shower doors and how to get rid of mold from a bathroom will go a long way towards having a clean and fresh environment. Should you require the expertise, we are always there for you at Crest force. Our passion and commitment to quality will allow you to rest assured that everything is being left clean and perfect for you in the bathroom. Your sparkling bathroom is a call away — just let Crest force take care of it!
Leave a Reply